-
Haltech 3in CAN Adaptor Cable DTM-4 Female Receptacle/Socket to 8 Pin Black Tyco
Regular price $47.99Regular price -
Haltech M10 x 1.0 to 1/8 BSPT Adaptor - Stainless Steel
Regular price $28.99Regular price -
Haltech M10 x 1.0 to 1/8 NPT Adaptor Thread M10 x 1.0 Female to 1/8NPTF Male
Regular price $28.99Regular price -
Haltech 7 Bar TI MAP Sensor 1/8 NPT w/Plug & Pins/-4 AN & 5mm Hosetail Adaptors
Regular price $265.99Regular price$245.00Sale price $265.99 -
Haltech Wideband Adaptor Harness 400mm
Regular price $33.99Regular price -
Haltech Analogue Output Adaptor
Regular price $120.99Regular price -
Haltech NTK Wideband Adaptor Harness 1200mm
Regular price $33.99Regular price -
Haltech 12 Pin TYCO for DRA Digital Reluctor Adaptor Plug & Pins
Regular price $28.99Regular price$26.00Sale price $28.99 -
Haltech CAN Adaptor Loom DT-4 to DTM-4
Regular price $28.99Regular price$26.00Sale price $28.99 -
Haltech CAN Adaptor Loom DTM-4 to Minifit Jr
Regular price $36.99Regular price$36.00Sale price $36.99 -
Haltech Tacho Output Adaptor
Regular price $95.99Regular price -
Haltech CAN Adaptor Loom DTM-4 to JST 5-Pin
Regular price $39.99Regular price$36.00Sale price $39.99 -
Haltech CAN Adaptor Loom DTM-4 to 6-Pin Circular Connector
Regular price $56.99Regular price$52.00Sale price $56.99 -
Haltech CAN Adaptor Loom DTM-4 to Flying Leads
Regular price $28.99Regular price$26.00Sale price $28.99 -
GReddy Profec B Spec 2 4mm In-Line Filter
Regular price $5.99Regular price$6.00Sale price $5.99Sale -
GReddy PRofec Electronic Boost Controller - Amber OLED
Regular price $451.99Regular price$475.00Sale price $451.99Sale -
GReddy PRofec Electronic Boost Controller
Regular price $408.99Regular price$430.00Sale price $408.99Sale -
GReddy GReddy Profec OLED Electronic Boost Controller Harness
Regular price $17.99Regular price$18.00Sale price $17.99Sale -
GReddy Sirius Vision Display (Turbo / Press / Temp / Voltage) 68mm Clear Thin-Film EL Display Gauge
Regular price $551.99Regular price$580.65Sale price $551.99Sale -
GReddy Sirius Meter - Water Temp 0/120 (Deg.C) 74mm Analog Gauge (w/Water Temp Sensor & Harness Set)
Regular price $275.99Regular price$290.32Sale price $275.99Sale -
GReddy Sirius Meter - Turbo Boost 74mm Analog Display Gauge (w/Boost Sensor & Harness Set)
Regular price $373.99Regular price$393.15Sale price $373.99Sale -
GReddy Sirius Control Unit (REQUIRED For Vision/Meter Gauges & Unify Sets)
Regular price $195.99Regular price$205.65Sale price $195.99Sale -
GReddy Sirius Unify Turbo Boost Gauge Set (Sirius Meter w/Boost Pressure Sensor Set & Vision Displ)
Regular price $850.99Regular price$895.16Sale price $850.99Sale -
GReddy Sirius Meter - Oil Pressure 0/10.0kPa 74mm Analog Gauge (w/Oil Press Sensor & Harness Set)
Regular price $373.99Regular price$393.15Sale price $373.99Sale
Overview
About the VR38DETT collection
The VR38DETT is the hand-built twin-turbo V6 that powers the Nissan GT-R R35 — a proven platform capable of 1,000+ horsepower with the right build. J-Spec Garage's VR38DETT Collection covers the engine components to take Godzilla well beyond factory output, reliably.
Shop stroker kits, forged internals, camshafts, head studs, gaskets, timing components, and turbo-ready hardware from the industry's most trusted brands. Whether you're sealing up a daily-driven R35 or assembling a drag-spec block, this collection has the VR38 parts to build it right — backed by our price match guarantee and fast US shipping.
Shop the full VR38DETT engine parts collection below.